2m flat profile kit for plasterboard with satin finish and 2 caps

2-meter flat aluminum profile kit for flush-mounting into plasterboard, with satin finish cover and end caps. The flat aluminum profile is used for proper heat dissipation of LED strips. How can I use the flat aluminum profile for flush-mounting into plasterboard? The flat aluminum profile is used for proper heat dissipation of LED strips, which will extend the life of the LED strip. The steps for installing the flat profile are: 1- Install the profile by screwing it to the plasterboard, 2- Flush the profile, 3- Glue the LED strip inside the flat profile if there is no cover, 4- Make sure it is glued thoroughly, including the beginning and end. If it doesn't adhere perfectly, apply a drop of glue to the back of the strip, 5- Pull the cable out through the perforated cap, 6- Close with the satin finish cover, 7- Connect your 24-volt LED strip to the power supply and your LED strip with profile is ready! Where can I install the LED strip with the flat, concealed aluminum profile, including a satin cover? Its ideal application is for lighting modern spaces, such as residential or office spaces. The profile is screwed to the plasterboard and then flush-mounted, so only the light beam, protected by a satin cover, will be visible. This solution offers greater design and extraordinary linearity. Choosing the right LED strip will produce a stunning result. It helps protect against dust and external agents, thus achieving a more aesthetically pleasing result for greater cleanliness. The LED strips that can be inserted into this profile can be found HERE. All 24-volt LED strips available on www.goodled.it require a power supply, which you can find by clicking HERE. The kit includes: 2 meters of concealed, flat, anodized aluminum profile, 2 meters of satin cover, and 2 end caps. Our flat profile is suitable for supporting an LED strip with a maximum power of 28 watts/meter. LED strip not included. Minimum purchase quantity: 2 bars. MAXIMUM POWER SUPPORTED: 28 watts/meter PROFILE COLOR: Satin Aluminum DIMENSIONS: Overall width: 61.5 mm Height: 14 mm Internal width: 20.7 mm NOTES: IP20